Description
The NPA pendant station is a
control device for all industrial
machinery. It operates as an
auxiliary controller of electrical
motors through a power interface,
such as a contactor or PLC.
Designed for heavy duty, NPA
is aimed specifically for the
industrial market.
Both thermoplastic rectangular
buttons and round disks are
available, the latter mounted
on rubber pushbuttons to guarantee
protection against dust which
may cause the pushbuttons to
stick when the equipment is
used under particular environmental
conditions. Buttons and discs
comprise of a moulded two-colour
arrangement offering a combination
of clear reading of symbols
and text with maximum wear resistance.
Materials and components are
wear resistant and protect the
equipment against water and
dust.
The pendant station can be customised
with labels and colours according
to the customer’s requirements.
By turning the cable sleeve
on the central part axis, the
pendant station is kept at an
angle of inclination of 20°
which allows the best view of
all control elements, allowing
the operator to work in a natural
and non-tiring position.
One, two or three speed switches
are available. The emergency
stop mushroom pushbutton complies
with the EN 418 standard and
is equipped with positive opening
nc switches.
Specification •
Customised symbols and
assemblies •
1, 2 or 3 speed switches
with up to 3 NC and/or NO contacts
for each actuator. •
Available for direct
control with dust-proof rubber
pushbuttons (Pe = 2.2 KW, Ue
= 400 Vac, Ig = 20A). •
The enclosure can be
customised with different colours
Technical
Detail •
Operational temperature
-25°C / +70°C •
Degree of protection
IP 65 •
Insulation category Class
II •
Rated operational current
1.9 A •
Rated operational voltage
250V •
Mechanical life 0.5x106
operations •
Enclosure CE Switches
CE, UL, cUL
