United Kingdom Not your location?

7551/2 Position Limit Switches

7551 and 7552 position limit switches are designed for the control of complex operating machinery. As they are control auxiliaries, they act on a power interface. The choice of materials, technical solutions and ample size make these limit switches ideal for use in strongly aggressive environments where they are exposed to the most severe operating conditions, guaranteeing impeccable function at all times and for their entire life.

7551 and 7552 limit switches are equipped with 4 fastening holes and 3 outputs for cable clamps to reduce installation time and facilitate wiring operations.

The enclosure is made of die-cast aluminum alloy and is resistant to any violent impact, chemical aggression and rust, while the bushings in sinterized material eliminate the need for any operations of routine maintenance of the head, since they are also made of impact-resistant zama.

7551 / 7552 Position Limit Switch Dimensions

General specifications

Conformity to Community Directives: 2006/95/CE 2006/42/CE
Conformity to Standards: EN 60204-1 EN 60947-1 EN 60947-5-1 EN 60529
Storage ambient temperature: -40°C/+70°C
Operational ambient temperature: -40°C/+70°C
Protection degree: IP66 max. with dedicated cable clamp M20
Insulation category: Class I
Cable entry: cable clamp M20
Operation frequency: 3600 operations/hour max
Markings and homologations: CE EAC

Specifications of the microswitches

Utilisation category: AC 15
Rated operational current: 3 A
Rated operational voltage: 250 V
Rated thermal current: 10 A
Rated insulation voltage: 300 V
Terminal referencing: according to EN 50013
Connections: screw-type terminals
Wires: 1x2.5 mm², 2x1.5 mm² (UL - (c)UL: use 60°C or 75°C copper (CU) conductor and wire 16-18 AWG)
Tightening torque: 0.8 Nm
Markings and homologations: CE (c)UL

Brochures & Technical Information