United Kingdom Not your location?
Tango Position Limit Switches

Tango is a position limit switch designed to control overhead travelling cranes, hoists and machine tools. It operates as auxiliary controller of electrical motors through power interfaces, such as contactors or PLCs.

X-type rods can move to 4 maintained positions. Tango is equipped with 1NC slow action switches or, upon request, with 1NO switches. All switches are of the positive opening type, thus suitable for safety functions.

Design
Tango is the latest generation of position limit switches: the peculiar design and the use of high performing polymers ensure high resistance and endurance under the heaviest utilization conditions.

Its design and overall dimensions facilitate installation and maintenance operations.

Materials
Both the enclosure and the head of Tango are made of thermoplastic material (nylon reinforced with fiberglass) ensuring wear resistance and protecting the equipment against water and dust. Inner components are made of techno-polymers guaranteeing a long life-cycle and constant performance even at extreme temperatures.

Tango Position Limit Switch Dimensions

General specifications

Conformity to Community Directives: 2006/95/CE 2006/42/CE
Conformity to Standards: EN 60204-1 EN 60947-1 EN 60947-5-1 EN 60529
Storage ambient temperature: -40°C/+70°C
Operational ambient temperature: -25°C/+70°C
Protection degree: IP 65
Insulation category: Class II
Cable entry: cable clamp M20
Operation frequency: 3600 operations/hour max
Markings and homologations: CE EAC

Specifications of the microswitches

Utilisation category: AC 15
Rated operational current: 3 A
Rated operational voltage: 250 V
Rated thermal current: 10 A
Rated insulation voltage: 500 V
Terminal referencing: according to EN 50013
Connections: screw-type terminals
Wires: 1x2.5 mm², 2x1.5 mm² (UL - (c)UL: use 60°C or 75°C copper (CU) conductor and wire 16-18 AWG)
Tightening torque: 0.6 Nm
Markings and homologations: CE (c)UL

Brochures & Technical Information