Products

Need a Document?

Sign up to view our downloads library containing our latest brochures and technical documents.

What Is an Inertia Reel? How Fall Arrest Blocks Work and When to Use Them

November 5, 2026

An inertia reel is a fall arrest device that lets a worker move freely at height while staying connected to an anchor point. The line pays out and retracts automatically as the worker moves, then locks almost instantly if a fall begins. Inertia reels are also known as fall arrest blocks, retractable fall arresters or self-retracting lifelines (SRLs).

The Metreel team are here to explain how an inertia reel works, the different types available, how to use and inspect one and how inertia reels compare with permanent rigid rail systems.

How Does an Inertia Reel Work?

What Is an Inertia Reel? How Fall Arrest Blocks Work and When to Use Them

Inside the housing, a length of webbing or steel cable is wound around a spring-loaded drum. As the worker moves away from the anchor, the line pays out. As they move back, the spring draws it in again. That constant tension means there is very little slack in the system at any point.

The locking mechanism works on a similar principle to a car seatbelt. At normal walking speed the drum turns freely. If the line is pulled out suddenly, as it would be during a fall, a speed-sensitive brake engages and stops the drum. Most units also include an energy absorber or friction brake that slows the worker over a short distance, reducing the force passed through the harness to the body.

When the reel is anchored above the user, the free fall distance is usually much shorter than with a fixed-length lanyard and shock absorber. That makes inertia reels well suited to work areas where the clearance below is limited.

Inertia Reel Standards

In the UK and Europe, inertia reels used for personal fall arrest are tested to EN 360, the standard for retractable type fall arresters. Models with a built-in rescue winch are usually also certified to EN 1496 as rescue lifting devices.

An inertia reel is only one part of a complete fall arrest system. It must be used with compatible equipment, including a full body harness to EN 361 and an anchor device to EN 795. The whole system must also be suitable for the task and the structure it is fixed to.

Types of Inertia Reel

Webbing Inertia Reels

Webbing units are lightweight and compact. Shorter versions, sometimes called personal fall limiters, often clip directly to the back of the harness and connect to an anchor above. They are popular for general industrial and construction work where mobility matters.

Cable Inertia Reels

Galvanised or stainless steel cable units offer longer working lengths, commonly 10 metres or more, along with better resistance to abrasion, heat and weather. They are usually fixed to a structure, overhead beam, tripod or davit.

Leading Edge Inertia Reels

Standard inertia reels are designed to be anchored above the user. Where the anchor has to sit at foot level and the line could run over an edge during a fall, such as on a flat roof or mezzanine, a reel specifically tested for edge use is required.

Retrieval Inertia Reels

Some reels incorporate a winch that allows a fallen worker to be raised or lowered to safety. These are commonly used for confined space entry with a tripod or davit, where a fast rescue is critical.

Using an Inertia Reel Safely

Inertia reels are simple to use but they still need to be set up correctly. Key points include:

  • Anchor overhead where possible. Positioning the reel directly above the work keeps fall distance to a minimum and reduces the risk of swing.
  • Watch for swing fall. If a worker moves a long way sideways from the anchor, a fall can turn into a pendulum that brings them into contact with nearby structures or the ground.
  • Check fall clearance. Even with a short arrest distance, there must be enough clear space below the user. Manufacturers state the minimum clearance needed for each model.
  • Never use it for lifting. Inertia reels are fall arrest devices only. They must not be used to raise or lower materials. People should only be raised or lowered during a planned rescue using a model designed for it.
  • Plan the rescue. A worker left suspended in a harness needs to be recovered quickly. The Work at Height Regulations 2005 require emergencies and rescue to be planned before work begins.

Inspection and Servicing

Inertia reels should be checked by the user before every use. A pre-use check typically covers:

  • the housing for cracks, damage or missing fasteners
  • the full length of webbing or cable for cuts, kinks, fraying, corrosion or chemical damage
  • smooth pay-out and retraction along the full length
  • correct locking when the line is pulled sharply
  • the fall indicator on the connector or line, which shows whether the unit has arrested a fall
  • labels and serial numbers being present and legible

On top of pre-use checks, inertia reels need periodic detailed inspections by a competent person, with the results recorded. Many manufacturers also require an annual service by an authorised technician. Some specify more frequent servicing in corrosive or offshore environments. Always follow the manufacturer’s instructions for the specific unit.

Any reel that has arrested a fall must be taken out of service straight away and returned for inspection before it is used again. The harness and connectors used with it should be checked on the same schedule. Metreel’s guide on how often harnesses should be inspected sets out the recommended intervals.

Inertia Reels vs Rigid Rail Systems

An inertia reel protects a worker around a single anchor point. That works well for tasks in one location but becomes harder to manage when a worker needs to travel along a route, such as a vehicle loading bay, a production line or a row of tanks. Moving away from the anchor increases the risk of swing and pulls the line at an angle.

For repeated access along the same path, a structural system is usually more practical. Metreel’s Met-Track® rigid rail fall arrest system provides a continuous anchorage along a fixed track, with a free-running trolley that follows the worker. Because the rail is rigid, it does not stretch in a fall, which keeps freefall distance short. Two users can work on the same system at once and pass one another without disconnecting.

The two approaches are not always alternatives. An inertia reel can connect the worker to a rail trolley, with the reel giving vertical freedom while the rail provides coverage along the route.

Where a fall can be prevented entirely rather than arrested, restraint is the better option. Metreel’s guide to the difference between fall arrest and fall restraint systems explains how to decide. Cable-based alternatives for roofs and walkways are covered in its guide to horizontal lifeline systems.

Choosing the Right Inertia Reel

Before specifying an inertia reel, it helps to answer a few questions:

  • Can the anchor be positioned overhead or will it sit at foot level?
  • How far will the worker need to move from the anchor point?
  • How much clearance is available below the work area?
  • Is the environment corrosive, hot, abrasive or exposed to the weather?
  • Is rescue retrieval needed, for example for confined space entry?
  • Will the same route be accessed often enough to justify a permanent system?

The answers will point towards the right type and length of reel. They may also show that a fixed rail or restraint system would be a better fit.

Get Advice on Fall Arrest for Your Site

Metreel designs and installs fall arrest and fall restraint systems for industrial and commercial sites across the UK. To discuss the right approach for your work area, call 0115 932 7010 or get in touch online.